port, plug and nutIngold Set Complete
The complete set of weld-in port, blind plug and union nut, as standard with hand knob, lock and sterile seal geometry.
Ingold System
Weld-in ports, plugs and union nuts for installing sensors and sampling accessories in vessels and pipelines. Available in the sizes Ingold19, Ingold25 and Ingold40.
19 / 25 / 40mm system diameter, Ingold19, 25 and 40
16bar operating pressure, gases and liquids
17.5…48mm effective length as standard, other lengths to measure
Ra < 0.6µm, product contact electropolished
Overview
One port. Sensor or plug.
The Ingold port is welded into the vessel wall or the pipeline. It takes sensors, for example for pH, pressure or temperature, and sampling accessories. A union nut holds the insert in the port; as long as no sensor is installed, a plug closes the opening.
- Sizes Ingold19, Ingold25 and Ingold40
- Port straight, at an angle or with a radius for the vessel wall
- Effective length 17.5, 46 or 48 mm as standard, other lengths to measure
- Bore in the port with tolerance H7
- Plugs with standard or sterile seal geometry
- For gases and liquids up to 16 bar
- Product-contact surfaces electropolished, Ra < 0.6 µm
- Product-contact parts marked with article number, material and heat number
- Gaskets FDA conform, USP Class VI, TSE-free
Components
Port, plug, nut.
port and measuring housingIngold Port
Straight, at an angle or with a radius, also with pipe connection DIN, ISO or OD or with clamp acc. DIN32676. As standard with 2 mm machining allowance on the face and 0.3 mm undersize in the bore.
with nut, completeIngold Plug
Blind plug with or without lock, with or without hand knob. Also plugs with bore, with pipe connection DIN, ISO or OD, with clamp acc. DIN32676 or with ring screw.
extended rangeSampling
Plugs with pierceable membrane for Ingold19 and Ingold25. Sampling valves with Ingold 19, Ingold 25 or clamp connection, with PTFE bellows or with hygienic O-ring seal.
per sizeSpare Part Set
Seal and retaining parts for the plug, for Ingold19, Ingold25 and Ingold40.
Sizes
Three diameters, three effective lengths.
Standard dimensions of the Ingold set and the straight port. The bore D is made with tolerance H7.
| Size | Port outer ømm | Bore Dmm | Effective lengthmm | Weight setkg | Weight portkg |
|---|---|---|---|---|---|
| Ingold19 | 35 | 19 | 17.5 | 0.32 | 0.15 |
| Ingold25 | 45 | 25 | 46 | 0.83 | 0.35 |
| Ingold40 | 60 | 40 | 48 | 1.45 | 0.47 |
Technical data
Materials, pressures, temperatures.
- Sizes
- Ingold19, Ingold25, Ingold40
- Media
- Gases and liquids
- Operating pressure
- 16 bar
- Product-contact materials
- 1.4435 BN2 (316L); special materials 1.4539 and 2.4602
- Non-product-contact materials
- 1.4305 or 1.4301; mounting and retaining parts A2
- Gaskets
- EPDM, silicone, FKM, FEP with silicone core, PEEK, FFKM
- Temperature by gasket
- EPDM −40 to +150 °C, briefly 160 °C; FEP/silicone −60 to +200 °C, briefly 230 °C; FKM −20 to +200 °C, briefly 230 °C
- Inside surface
- Ra 0.6 or 0.4 µm, electropolished
- Traceability
- All product-contact parts marked with article number, material and heat number
- Certificates
- Inspection certificate 3.1 acc. EN10204 for product-contact parts; gaskets FDA conform, USP Class VI, TSE-free
Ordering key
Ten positions, one component.
Example: I25.L46.G.F2.D2.BHS.ST.35.0.C — Ingold set complete, ø25 mm, effective length 46 mm, straight, 2 mm allowance, 0.3 mm undersize, blind plug with hand knob and lock, sterile seal geometry, 1.4435 BN2 (316L), EPDM, Ra 0.6 µm electropolished.
Article and size
- I: Ingold set complete
- E: port and measuring housing
- K: plug complete
- M: union nut
- System ø19, ø25 or ø40 mm
- Effective length in mm
Port
- Straight, angle in degrees or radius in mm
- Connection DIN, ISO or OD
- Clamp acc. DIN32676
- Face allowance 2 mm or none
- Inside undersize 0.3 mm or none
Plug
- Blind plug with or without lock
- Blind plug with hand knob, with or without lock
- Bore in mm
- Tube connection DIN, ISO or OD
- Clamp acc. DIN32676
- Ring screw
- Seal geometry standard or sterile
Material and equipment
- 1.4435 BN2 (316L), 1.4539 or 2.4602
- 1.4305 or 1.4301 non-product contact
- Gasket EPDM, silicone, FKM, FEP with silicone core, PEEK or FFKM
- Ra 0.6 or 0.4 µm, electropolished
Contact
Enquiry
Tell us the size, effective length, mounting position (straight, angle or radius), plug version, material, gasket and surface. We will propose the right version.
Prefer to write directly?